Blog RSS
2003 Toyota Tacoma PreRunner "Sleeper" Edition with Cantilever Suspension: Finished Build
OVERALL VEHICLE SPECS: 2003 Toyota Tacoma PreRunner V6, 2WD 1.5" ish lift over stock on baby 31" tires HERE’S WHAT WE DID: This customer wanted a "sleeper" pre-runner Tacoma with extremely comfortable suspension without the look of a typical sand pre-runner and without cutting the bed or fenders. We achieved this by building a cantilever system to house ADS 3.0" x 14" travel MBR shocks and tucking everything up under the bed. Front Suspension: Installed Total Chaos lower control arms, lower uniball conversion kit, heim steering kit, coil tower gussets and eccentric cam gussets ADS 2.5" Coil overs Changed valving...
2003 Toyota Tacoma PreRunner "Sleeper" Edition with Cantilever Suspension: Before Photos
Click here to view the finished build! OVERALL VEHICLE SPECS: 2003 Toyota Tacoma PreRunner V6, 2WD 1.5" ish lift over stock on baby 31" tires HERE’S WHAT WE DID: This customer wanted a "sleeper" pre-runner Tacoma with extremely comfortable suspension without the look of a typical sand pre-runner and without cutting the bed or fenders. We achieved this by building a cantilever system to house ADS 3.0" x 14" travel MBR shocks and tucking everything up under the bed. Front Suspension: Installed Total Chaos lower control arms, lower uniball conversion kit, heim steering kit, coil tower gussets and eccentric cam...
1974 Chevy Silverado C30
OVERALL VEHICLE SPECS: 1974 Chevy C30 Pickup Flat Bed 550 Ci Dart Big Block 4L80 Auto Trans Rear Dana 80 Dually HERE’S WHAT WE DID: Working from the rear, forward we Removed old rear axle and suspension New dana 80 went in along with a modified Ridetech Parallel four link with small coilovers and bags Dual air compressor with a 5 gallon tank is mounted in the tool box. This system has high sensors in 4 corners allowing you to dial in 3 ride height positions with the touch pad controller. Modified and installed a new custom Rick's Stainless fuel tank with...
Vintage Bronco Front & Rear Suspension Build: After
See the FRONT suspension build here!See the REAR suspension build here! OVERALL VEHICLE SPECS: 5 liter V8 Automatic transmission Atlas transfer case Ruffstuff 9” Rear axle Bronco Dana 44 front axle 37” Goodyear MTR Tires HERE’S WHAT WE DID: Started with the front suspension build and 6 months later did the rear suspension Cut out all existing suspension (radius arms in front and leaf springs in rear) Designed new suspension in CAD Added 3 link front Double triangulated 4 link rear 12” 2.125” ADS coil overs front and rear (started with Kings) High pinon ford Dana 44 was re-tubed to increase wheel...
Vintage Bronco Rear Suspension: Before/During
See the FRONT suspension build here!See the AFTER pics here! OVERALL VEHICLE SPECS: 5 liter V8 Automatic transmission Atlas transfer case Ruffstuff 9” Rear axle Bronco Dana 44 front axle 37” Goodyear MTR Tires HERE’S WHAT WE DID: Started with the front suspension build and 6 months later did the rear suspension Cut out all existing suspension (radius arms in front and leaf springs in rear) Designed new suspension in CAD Added 3 link front Double triangulated 4 link rear 12” 2.125” ADS coil overs front and rear (started with Kings) High pinon ford Dana 44 was re-tubed to increase wheel...
Tags
- All
- 14 bolt
- 1974 Chevy Silverado C30
- 1974 Ford Bronco
- 4Runner
- 4x4
- ADS Bump Stops
- ADS Shocks
- Air bags
- Aluminum
- Atlas Transfer Case
- Buggy
- Builds
- Bumper
- Cantilever
- Chevy 350
- Chevy C30
- classic bronco
- Crossmember
- Custom Bumper
- Dana 44
- Dana 60
- Dana 80
- DIY
- FJ40
- Fordyce
- Free
- Front Suspension
- Guides
- How to Service Offroad Shocks
- Humvee
- Jeep Cherokee
- Jeep JK
- Jeep LJ
- Jeep TJ
- Jeep XJ
- King of the Hammers
- KOH
- Metal Fabrication
- Nissian Titan
- Offroad
- Overland
- Pre Runner
- PreRunner
- Products
- Radflo
- Rear Suspension
- Rock and Road Performance
- Roll Cage
- Rubicon
- Ruffstuff 9" Axle
- Shock Service
- Skid Plate
- Sliders
- Suspension
- Total Chaos lower control arms
- Toyota
- Toyota Tacoma
- Toyota Tundra
- Trail Gear 8.4" housing
- Trailing Arms
- Triangulated 3 link
- Triangulated 4 Link
- Truss
- Tube Bumper
- Tube Frame
- Tube Work
- UHMW
- Ultra4
- Videos
- vintage bronco
- Wheeling Trip
- Youtube