Builds RSS

4Runner, 4x4, ADS Shocks, Builds, Metal Fabrication, Suspension, Toyota, Triangulated 3 link -

This build was a fun one since we haven't worked on a Toyota 4Runner in awhile. This customer had done a lot of his own work on the truck but was ready for a smoother ride. We kept a lot of his existing parts, but put a shiny new triangulated 3-link suspension set up with some awesome new ADS shocks.Here's some specs! FRONT END: We enhanced the existing Toyota Axles and steering with:- Triangulated 3 Link with 12" ADS 2.125" Coilovers- New Bracketry: lower link, upper link, track bar- Coilover towers- Ruffstuff frame plates REAR END: - 12" ADS 2.125" Coilovers...

Read more

14 bolt, 4x4, ADS Shocks, Builds, Custom Bumper, Dana 60, Metal Fabrication, Roll Cage, Suspension, Triangulated 3 link, Triangulated 4 Link, vintage bronco -

It's been awhile since we shared a project on here! Just have had our nose down working to bring your visions to life. This customer brought in a Vintage 1974 Ford Bronco that he was ready to beef up for wheeling trips with his kids

Read more

14 bolt, 1974 Ford Bronco, 4x4, ADS Shocks, Builds, Bumper, classic bronco, Custom Bumper, Dana 60, Offroad, Roll Cage, Sliders, Suspension, Triangulated 3 link, Triangulated 4 Link, vintage bronco -

Here's some specs we've been working on for this Classic 1974 Ford Bronco to make it trail ready. See the finished build HERE! Roll Cage & Sliders: 6 point family-friendly cage tied into a 4 point engine cage through the firewall, all tied directly into the frame Custom rectangular tube sliders Front Axle/Suspension: King pin shaved Dana 60 and custom truss Triangulated 3-link with 14" travel ADS 2.5" coil overs and 2" hydraulic bump stops PSC hydro assist Rear Axle/Suspension: Shaved 14 bolt with double triangulated 4 link and custom truss 16" travel ADS 2.5" coil overs and 2" hydraulic bump stops Anti-rock...

Read more

Builds, Jeep LJ, Suspension, Trailing Arms, Truss -

We recently wrapped up a fun build for a customer here at Rock and Road. He had done quite a bit of work of his own on his 2006 Jeep LJ so we had a pretty clean and awesome rig to begin with. Take a look at the Walk-around video below to hear Greg talk about the suspension work we did on this sweet jeep to make it ride amazingly! Scroll for all the photos with progress/before shots at the bottom! Here's a quick break down of the details that we worked on: - Stretched the wheel base to 110"...

Read more

Builds, Skid plate, Sliders, Toyota Tundra, Tube Bumper, UHMW -

It's been awhile since we updated you on what's been happening in the shop. Someday we will give you a tour of our new shop in Loomis, CA, but for now check out our most recent project. This customer brought us a 2015 Toyota Tundra to beef up. His to do list: sliders, tube bumper with winch, & skid plate. First up are the sliders made of 1 3/4" DOM tube with expanded metal over top. The customer lives where it snows, so the expanded metal allows him to stomp off the snow and reduce slipping on the tube. These...

Read more