Toyota RSS
FJ40 Suspension Build #2 After Pics
FJ40 Build #2 AFTER See before pics here. Overall vehicle specs: Chevy 350 NV4500 Transmission Atlas 2 Speed transfer case Solid high pinon dana 60 rear axle Kingpin Chevy low piñon dana 60 front axle 40” Maxix Creepy Crawlers tires Here’s what we did: Removed 4' of the frame in front and 4' in back and replaced with tubular frame (2" 120 wall in front and 1.75" 120 wall in rear) Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link...
FJ40 Suspension Build #2 Before/During
FJ40 Build #2 Before/During See after pics here. Overall vehicle specs: Chevy 350 NV4500 Transmission Atlas 2 Speed transfer case Solid high pinon dana 60 rear axle Kingpin Chevy low piñon dana 60 front axle 40” Maxix Creepy Crawlers tires Here’s what we did: Removed 4' of the frame in front and 4' in back and replaced with tubular frame (2" 120 wall in front and 1.75" 120 wall in rear) Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link...
Toyota 4Runner Suspension Build
This build was a fun one since we haven't worked on a Toyota 4Runner in awhile. This customer had done a lot of his own work on the truck but was ready for a smoother ride. We kept a lot of his existing parts, but put a shiny new triangulated 3-link suspension set up with some awesome new ADS shocks.Here's some specs! FRONT END: We enhanced the existing Toyota Axles and steering with:- Triangulated 3 Link with 12" ADS 2.125" Coilovers- New Bracketry: lower link, upper link, track bar- Coilover towers- Ruffstuff frame plates REAR END: - 12" ADS 2.125" Coilovers...
Tacoma Sliders
Here's a quick project we recently wrapped up on here at Rock and Road in Loomis, CA. This customer was moving out to Colorado and because of the snow that he is bound to encounter, he wanted some anti-slip sliders/steps for his '11 Toyota Tacoma. We did custom bent tube sliders with custom cutouts on our CNC plasma table, then dimple died them to create a grippy surface on the top. What do you think? If you'd like a custom set, shoot us an email! info@rockandroadperformance.com
Plate Bumper Process
Last week we got to work on a plate bumper for a customer with a Nissan Pathfinder. The customer gave us a few inspiration pictures, then we went at it. He wanted it to accommodate aftermarket Jeep JK fog lights as well as a light bar that he would install in the future to the tube. In addition, he wanted his brand new Smittybuilt winch to be challenging to steal. One other feature we added in was cutouts just under the fog lights to fit a high lift to lift his truck when he's in a bind. You can see...
Tags
- All
- 14 bolt
- 1974 Chevy Silverado C30
- 1974 Ford Bronco
- 4Runner
- 4x4
- ADS Shocks
- Air bags
- Aluminum
- Atlas Transfer Case
- Buggy
- Builds
- Bumper
- Chevy 350
- Chevy C30
- classic bronco
- Crossmember
- Custom Bumper
- Dana 44
- Dana 60
- Dana 80
- DIY
- FJ40
- Fordyce
- Free
- Guides
- How to Service Offroad Shocks
- Humvee
- Jeep Cherokee
- Jeep JK
- Jeep LJ
- Jeep TJ
- Jeep XJ
- King of the Hammers
- KOH
- Metal Fabrication
- Nissian Titan
- Offroad
- Overland
- Products
- Radflo
- Rock and Road Performance
- Roll Cage
- Rubicon
- Ruffstuff 9" Axle
- Shock Service
- Skid plate
- Sliders
- Suspension
- Toyota
- Toyota Tacoma
- Toyota Tundra
- Trailing Arms
- Triangulated 3 link
- Triangulated 4 Link
- Truss
- Tube Bumper
- Tube Frame
- Tube Work
- UHMW
- Ultra4
- Videos
- vintage bronco
- Wheeling Trip
- Youtube