Progress Shots of Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades

14 bolt, 1974 Ford Bronco, 4x4, ADS Shocks, Builds, Bumper, classic bronco, Custom Bumper, Dana 60, Offroad, Roll Cage, Sliders, Suspension, Triangulated 3 link, Triangulated 4 Link, vintage bronco -

Progress Shots of Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades

Here's some specs we've been working on for this Classic 1974 Ford Bronco to make it trail ready. 
See the finished build HERE!

Roll Cage & Sliders:
  • 6 point family-friendly cage tied into a 4 point engine cage through the firewall, all tied directly into the frame
  • Custom rectangular tube sliders
Front Axle/Suspension:
  • King pin shaved Dana 60 and custom truss
  • Triangulated 3-link with 14" travel ADS 2.5" coil overs and 2" hydraulic bump stops
  • PSC hydro assist
Rear Axle/Suspension:
  • Shaved 14 bolt with double triangulated 4 link and custom truss
  • 16" travel ADS 2.5" coil overs and 2" hydraulic bump stops
  • Anti-rock rear sway bar
Rear Plated Bumper: (note: we did not build the front bumper/stinger)
  • 3/16" plate bumper with hitch, D-ring tabs, high lift points, and tire/cooler swing out
    Aluminum Dash:
    • By bringing the dash out closer to the steering wheel, it allows the customer to reach any switches while belted in. 
    • We moved the steering column in line with the driver's seat with a custom tilt column. 

    RECAP with PHOTOS:

    Roll Cage & Sliders:

    • 6 point family-friendly cage tied into a 4 point engine cage through the firewall, all tied directly into the frame
    • Custom rectangular tube slidersbronco roll cage

    bronco roll cage

    bronco roll cage

    bronco roll cage

    bronco roll cage

    bronco roll cage

    bronco roll cage

    bronco roll cage

    bronco roll cage

    bronco roll cage

    FRONT AXLE/SUSPENSION:

    • King pin shaved Dana 60 and custom truss
    • Triangulated 3-link with 14" travel ADS 2.5" coil overs and 2" hydraulic bump stops
    • PSC hydro assist 

     

    bronco Triangulated 3 link

    bronco Triangulated 3 link

    bronco Triangulated 3 link

    bronco Triangulated 3 link

    bronco Triangulated 3 link

    bronco Triangulated 3 link

    bronco Triangulated 3 link

    bronco Triangulated 3 link

     

    REAR AXLE/SUSPENSION:

    • Shaved 14 bolt with double triangulated 4 link and custom truss
    • 16" travel ADS 2.5" coil overs and 2" hydraulic bump stops
    • Anti-rock rear sway bar

     bronco double triangulated 4 link

    bronco double triangulated 4 link

    bronco double triangulated 4 link

    bronco double triangulated 4 link

    bronco double triangulated 4 link

    bronco Triangulated 3 link

    REAR PLATED BUMPER: (NOTE: WE DID NOT BUILD THE FRONT BUMPER/STINGER)

    • 3/16" plate bumper with hitch, D-ring tabs, high lift points, and tire/cooler swing out
    rear plated bronco bumper
    rear plated bronco bumper

      ALUMINUM DASH:

      • By bringing the dash out closer to the steering wheel, it allows the customer to reach any switches while belted in. 
      • We moved the steering column in line with the driver's seat with a custom tilt column. 

      custom tilt column

      custom bronco tilt column

      bronco custom tilt column

      custom bronco aluminum dash panel

       

      See the finished build HERE!