4x4 RSS
FJ40 Suspension Build #2 After Pics
FJ40 Build #2 AFTER See before pics here. Overall vehicle specs: Chevy 350 NV4500 Transmission Atlas 2 Speed transfer case Solid high pinon dana 60 rear axle Kingpin Chevy low piñon dana 60 front axle 40” Maxix Creepy Crawlers tires Here’s what we did: Removed 4' of the frame in front and 4' in back and replaced with tubular frame (2" 120 wall in front and 1.75" 120 wall in rear) Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link...
FJ40 Suspension Build #2 Before/During
FJ40 Build #2 Before/During See after pics here. Overall vehicle specs: Chevy 350 NV4500 Transmission Atlas 2 Speed transfer case Solid high pinon dana 60 rear axle Kingpin Chevy low piñon dana 60 front axle 40” Maxix Creepy Crawlers tires Here’s what we did: Removed 4' of the frame in front and 4' in back and replaced with tubular frame (2" 120 wall in front and 1.75" 120 wall in rear) Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link...
Toyota 4Runner Suspension Build
This build was a fun one since we haven't worked on a Toyota 4Runner in awhile. This customer had done a lot of his own work on the truck but was ready for a smoother ride. We kept a lot of his existing parts, but put a shiny new triangulated 3-link suspension set up with some awesome new ADS shocks.Here's some specs! FRONT END: We enhanced the existing Toyota Axles and steering with:- Triangulated 3 Link with 12" ADS 2.125" Coilovers- New Bracketry: lower link, upper link, track bar- Coilover towers- Ruffstuff frame plates REAR END: - 12" ADS 2.125" Coilovers...
Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades
It's been awhile since we shared a project on here! Just have had our nose down working to bring your visions to life. This customer brought in a Vintage 1974 Ford Bronco that he was ready to beef up for wheeling trips with his kids
Progress Shots of Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades
Here's some specs we've been working on for this Classic 1974 Ford Bronco to make it trail ready. See the finished build HERE! Roll Cage & Sliders: 6 point family-friendly cage tied into a 4 point engine cage through the firewall, all tied directly into the frame Custom rectangular tube sliders Front Axle/Suspension: King pin shaved Dana 60 and custom truss Triangulated 3-link with 14" travel ADS 2.5" coil overs and 2" hydraulic bump stops PSC hydro assist Rear Axle/Suspension: Shaved 14 bolt with double triangulated 4 link and custom truss 16" travel ADS 2.5" coil overs and 2" hydraulic bump stops Anti-rock...
Tags
- All
- 14 bolt
- 1974 Chevy Silverado C30
- 1974 Ford Bronco
- 4Runner
- 4x4
- ADS Shocks
- Air bags
- Aluminum
- Atlas Transfer Case
- Buggy
- Builds
- Bumper
- Chevy 350
- Chevy C30
- classic bronco
- Crossmember
- Custom Bumper
- Dana 44
- Dana 60
- Dana 80
- DIY
- FJ40
- Fordyce
- Free
- Guides
- How to Service Offroad Shocks
- Humvee
- Jeep Cherokee
- Jeep JK
- Jeep LJ
- Jeep TJ
- Jeep XJ
- King of the Hammers
- KOH
- Metal Fabrication
- Nissian Titan
- Offroad
- Overland
- Products
- Radflo
- Rock and Road Performance
- Roll Cage
- Rubicon
- Ruffstuff 9" Axle
- Shock Service
- Skid plate
- Sliders
- Suspension
- Toyota
- Toyota Tacoma
- Toyota Tundra
- Trailing Arms
- Triangulated 3 link
- Triangulated 4 Link
- Truss
- Tube Bumper
- Tube Frame
- Tube Work
- UHMW
- Ultra4
- Videos
- vintage bronco
- Wheeling Trip
- Youtube