Custom Bumper RSS
2003 Toyota Tacoma PreRunner "Sleeper" Edition with Cantilever Suspension: Finished Build
OVERALL VEHICLE SPECS: 2003 Toyota Tacoma PreRunner V6, 2WD 1.5" ish lift over stock on baby 31" tires HERE’S WHAT WE DID: This customer wanted a "sleeper" pre-runner Tacoma with extremely comfortable suspension without the look of a typical sand pre-runner and without cutting the bed or fenders. We achieved this by building a cantilever system to house ADS 3.0" x 14" travel MBR shocks and tucking everything up under the bed. Front Suspension: Installed Total Chaos lower control arms, lower uniball conversion kit, heim steering kit, coil tower gussets and eccentric cam gussets ADS 2.5" Coil overs Changed valving...
2003 Toyota Tacoma PreRunner "Sleeper" Edition with Cantilever Suspension: Before Photos
Click here to view the finished build! OVERALL VEHICLE SPECS: 2003 Toyota Tacoma PreRunner V6, 2WD 1.5" ish lift over stock on baby 31" tires HERE’S WHAT WE DID: This customer wanted a "sleeper" pre-runner Tacoma with extremely comfortable suspension without the look of a typical sand pre-runner and without cutting the bed or fenders. We achieved this by building a cantilever system to house ADS 3.0" x 14" travel MBR shocks and tucking everything up under the bed. Front Suspension: Installed Total Chaos lower control arms, lower uniball conversion kit, heim steering kit, coil tower gussets and eccentric cam...
FJ40 Suspension Build #2 After Pics
FJ40 Build #2 AFTER See before pics here. Overall vehicle specs: Chevy 350 NV4500 Transmission Atlas 2 Speed transfer case Solid high pinon dana 60 rear axle Kingpin Chevy low piñon dana 60 front axle 40” Maxix Creepy Crawlers tires Here’s what we did: Removed 4' of the frame in front and 4' in back and replaced with tubular frame (2" 120 wall in front and 1.75" 120 wall in rear) Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link...
Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades
It's been awhile since we shared a project on here! Just have had our nose down working to bring your visions to life. This customer brought in a Vintage 1974 Ford Bronco that he was ready to beef up for wheeling trips with his kids
Progress Shots of Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades
Here's some specs we've been working on for this Classic 1974 Ford Bronco to make it trail ready. See the finished build HERE! Roll Cage & Sliders: 6 point family-friendly cage tied into a 4 point engine cage through the firewall, all tied directly into the frame Custom rectangular tube sliders Front Axle/Suspension: King pin shaved Dana 60 and custom truss Triangulated 3-link with 14" travel ADS 2.5" coil overs and 2" hydraulic bump stops PSC hydro assist Rear Axle/Suspension: Shaved 14 bolt with double triangulated 4 link and custom truss 16" travel ADS 2.5" coil overs and 2" hydraulic bump stops Anti-rock...
Tags
- All
- 14 bolt
- 1974 Chevy Silverado C30
- 1974 Ford Bronco
- 4Runner
- 4x4
- ADS Bump Stops
- ADS Shocks
- Air bags
- Aluminum
- Atlas Transfer Case
- Buggy
- Builds
- Bumper
- Cantilever
- Chevy 350
- Chevy C30
- classic bronco
- Crossmember
- Custom Bumper
- Dana 44
- Dana 60
- Dana 80
- DIY
- First Gen Tacoma
- FJ40
- Fordyce
- Free
- Front Suspension
- Guides
- How to Service Offroad Shocks
- Humvee
- Jeep Cherokee
- Jeep JK
- Jeep LJ
- Jeep TJ
- Jeep XJ
- King of the Hammers
- KOH
- Metal Fabrication
- Nissian Titan
- Offroad
- Overland
- Pre Runner
- PreRunner
- Products
- Radflo
- Rear Suspension
- Rock and Road Performance
- Roll Cage
- Rubicon
- Ruffstuff 9" Axle
- Shock Service
- Skid plate
- Sliders
- Suspension
- Total Chaos lower control arms
- Toyota
- Toyota Tacoma
- Toyota Tundra
- Trail Gear 8.4" housing
- Trailing Arms
- Triangulated 3 link
- Triangulated 4 Link
- Truss
- Tube Bumper
- Tube Frame
- Tube Work
- UHMW
- Ultra4
- Videos
- vintage bronco
- Wheeling Trip
- Youtube