Metal Fabrication RSS
2003 Toyota Tacoma PreRunner "Sleeper" Edition with Cantilever Suspension: Finished Build
OVERALL VEHICLE SPECS: 2003 Toyota Tacoma PreRunner V6, 2WD 1.5" ish lift over stock on baby 31" tires HERE’S WHAT WE DID: This customer wanted a "sleeper" pre-runner Tacoma with extremely comfortable suspension without the look of a typical sand pre-runner and without cutting the bed or fenders. We achieved this by building a cantilever system to house ADS 3.0" x 14" travel MBR shocks and tucking everything up under the bed. Front Suspension: Installed Total Chaos lower control arms, lower uniball conversion kit, heim steering kit, coil tower gussets and eccentric cam gussets ADS 2.5" Coil overs Changed valving...
Vintage Bronco Front & Rear Suspension Build: After
See the FRONT suspension build here!See the REAR suspension build here! OVERALL VEHICLE SPECS: 5 liter V8 Automatic transmission Atlas transfer case Ruffstuff 9” Rear axle Bronco Dana 44 front axle 37” Goodyear MTR Tires HERE’S WHAT WE DID: Started with the front suspension build and 6 months later did the rear suspension Cut out all existing suspension (radius arms in front and leaf springs in rear) Designed new suspension in CAD Added 3 link front Double triangulated 4 link rear 12” 2.125” ADS coil overs front and rear (started with Kings) High pinon ford Dana 44 was re-tubed to increase wheel...
Vintage Bronco Rear Suspension: Before/During
See the FRONT suspension build here!See the AFTER pics here! OVERALL VEHICLE SPECS: 5 liter V8 Automatic transmission Atlas transfer case Ruffstuff 9” Rear axle Bronco Dana 44 front axle 37” Goodyear MTR Tires HERE’S WHAT WE DID: Started with the front suspension build and 6 months later did the rear suspension Cut out all existing suspension (radius arms in front and leaf springs in rear) Designed new suspension in CAD Added 3 link front Double triangulated 4 link rear 12” 2.125” ADS coil overs front and rear (started with Kings) High pinon ford Dana 44 was re-tubed to increase wheel...
FJ40: Before/During
FJ40 Build Overall vehicle specs:4BT CumminsNV4500 Transmission Atlas 2 Speed transfer case14 bolt rearKingpin Chevy low piñon dana 60 front axle40” Maxix Treps tires Here’s what we did: Reinforced the frame Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link tabs 14” 2.5 Radflo coilovers Radflo bump stops Antirock swaybar Aluminum roof Front Axle: Rear Axle: Crossmembers: See After Pics here!
Toyota 4Runner Suspension Build
This build was a fun one since we haven't worked on a Toyota 4Runner in awhile. This customer had done a lot of his own work on the truck but was ready for a smoother ride. We kept a lot of his existing parts, but put a shiny new triangulated 3-link suspension set up with some awesome new ADS shocks.Here's some specs! FRONT END: We enhanced the existing Toyota Axles and steering with:- Triangulated 3 Link with 12" ADS 2.125" Coilovers- New Bracketry: lower link, upper link, track bar- Coilover towers- Ruffstuff frame plates REAR END: - 12" ADS 2.125" Coilovers...
Tags
- All
- 14 bolt
- 1974 Chevy Silverado C30
- 1974 Ford Bronco
- 4Runner
- 4x4
- ADS Bump Stops
- ADS Shocks
- Air bags
- Aluminum
- Atlas Transfer Case
- Buggy
- Builds
- Bumper
- Cantilever
- Chevy 350
- Chevy C30
- classic bronco
- Crossmember
- Custom Bumper
- Dana 44
- Dana 60
- Dana 80
- DIY
- First Gen Tacoma
- FJ40
- Fordyce
- Free
- Front Suspension
- Guides
- How to Service Offroad Shocks
- Humvee
- Jeep Cherokee
- Jeep JK
- Jeep LJ
- Jeep TJ
- Jeep XJ
- King of the Hammers
- KOH
- Metal Fabrication
- Nissian Titan
- Offroad
- Overland
- Pre Runner
- PreRunner
- Products
- Radflo
- Rear Suspension
- Rock and Road Performance
- Roll Cage
- Rubicon
- Ruffstuff 9" Axle
- Shock Service
- Skid plate
- Sliders
- Suspension
- Total Chaos lower control arms
- Toyota
- Toyota Tacoma
- Toyota Tundra
- Trail Gear 8.4" housing
- Trailing Arms
- Triangulated 3 link
- Triangulated 4 Link
- Truss
- Tube Bumper
- Tube Frame
- Tube Work
- UHMW
- Ultra4
- Videos
- vintage bronco
- Wheeling Trip
- Youtube