Triangulated 4 Link RSS
FJ40 Suspension Build #2 Before/During
FJ40 Build #2 Before/During See after pics here. Overall vehicle specs: Chevy 350 NV4500 Transmission Atlas 2 Speed transfer case Solid high pinon dana 60 rear axle Kingpin Chevy low piñon dana 60 front axle 40” Maxix Creepy Crawlers tires Here’s what we did: Removed 4' of the frame in front and 4' in back and replaced with tubular frame (2" 120 wall in front and 1.75" 120 wall in rear) Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link...
FJ40 After
FJ40 Build Overall vehicle specs: 4BT CumminsNV4500 Transmission Atlas 2 Speed transfer case14 bolt rearKingpin Chevy low piñon dana 60 front axle40” Maxix Treps tires Here’s what we did: Reinforced the frame Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link tabs 14” 2.5 Radflo coilovers Radflo bump stops Antirock swaybar Aluminum roof See before photos here! Rear Axle:
FJ40: Before/During
FJ40 Build Overall vehicle specs:4BT CumminsNV4500 Transmission Atlas 2 Speed transfer case14 bolt rearKingpin Chevy low piñon dana 60 front axle40” Maxix Treps tires Here’s what we did: Reinforced the frame Motor mounts Transmission mount Beefy trusses front and rear Full hydraulic steering behind the axle Front and rear double triangulated 4 link set up with custom crossmembers and link tabs 14” 2.5 Radflo coilovers Radflo bump stops Antirock swaybar Aluminum roof Front Axle: Rear Axle: Crossmembers: See After Pics here!
Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades
It's been awhile since we shared a project on here! Just have had our nose down working to bring your visions to life. This customer brought in a Vintage 1974 Ford Bronco that he was ready to beef up for wheeling trips with his kids
Progress Shots of Vintage 1974 Ford Bronco: Custom Roll Cage, Plate Bumper, + Suspension Upgrades
Here's some specs we've been working on for this Classic 1974 Ford Bronco to make it trail ready. See the finished build HERE! Roll Cage & Sliders: 6 point family-friendly cage tied into a 4 point engine cage through the firewall, all tied directly into the frame Custom rectangular tube sliders Front Axle/Suspension: King pin shaved Dana 60 and custom truss Triangulated 3-link with 14" travel ADS 2.5" coil overs and 2" hydraulic bump stops PSC hydro assist Rear Axle/Suspension: Shaved 14 bolt with double triangulated 4 link and custom truss 16" travel ADS 2.5" coil overs and 2" hydraulic bump stops Anti-rock...